How much damage can it repair?
MagicEzy 9 Second Chip Fix is suitable as a filler for chips and gouges over 1mm in width up to 4mm deep. For smaller damage (fine cracks and scratches) use Hairline Fix instead.
One tube will repair 15-20 5mm (diameter) x 3mm (deep) chips.
What surfaces will it work on?
As well as fiberglass you can also use it to repair ceramic, porcelain, acrylic, wood, enamel, dry wall, and stone surfaces.
Do I need to prime the surface first?
9 Second Chip Fix will adhere to fiberglass without a primer. For plastic or aluminum surfaces or to strengthen weakened fiberglass, apply a coat of MagicEzy Mega Fusion primer first.
Will it repair hull damage?
The product will professionally repair areas that are above the waterline.
You have a lot of whites to choose from. How do I select the right one?
It’s difficult to provide accurate color recommendations, but I can describe our white colors to help you make a choice.
- Snow White (RAL 9003) is a clean, pure white (Our brightest and best selling white)
- Oyster White (RAL 9010) is an creamy off-white
- Matterhorn White (RAL 9002) is an off-white with a slight grey tone.
Can I add other tints or colorants to the product to achieve a color match?
No. Mixing additional products compromises the adhesion and effectiveness of MagicEzy products. We do not guarantee any products that have been mixed with other additives. However, two of our products can be mixed together.
Does the color dry lighter or darker than the color on the swatch?
The product is the same color wet or dry. When selecting colors note that the appearance of colors vary depending on the computer screen. If you’re not sure, buy one of our kits so you can blend colors to suit.
How long does it take to dry?
In temperatures over 20°C / 70°F, our repairs are already extremely strong within 24 to 48 hours.
Does it dry in gloss or matte finish?
9 Second Chip Fix dries in a matte finish.
Can I sand the product once dried?
Yes however there’s no need to sand the repair itself. Simply use the end of the tube to create a level repair. If you do want to sand the surface, please allow 7 days for the product to fully cure before sanding.
Can I paint over the product?
Yes, with water-based paints.
How do I store tube once opened?
We suggest that you store the remaining product in the refrigerator.
What if I am not satisfied with the results?
All MagicEzy products come with a MONEY BACK guarantee.
Simply return it to us (with the receipt) within 60 days and we’ll provide a full refund or replacement.