Zoom Bath & Sink REPAIREZY™
Zoom Bath & Sink REPAIREZY™
Zoom Bath & Sink REPAIREZY™ - MagicEzy AU
Zoom Bath & Sink REPAIREZY™ - MagicEzy AU
Zoom Bath & Sink REPAIREZY™ - MagicEzy AU

Bath & Sink REPAIREZY™

Subscription Save


Patch chips and scratches on your bathtub, shower or sink … Without the mess, confusion or hassle.

When you have small areas of damage to fix, you don’t want to waste time trying to work with messy, multi-part epoxy fillers.

With Bath & Sink REPAIREZY™ we’ve made it easy for you to fix the damage - fast. Our product is a premixed, pre-coloured, nanotechnology filler that enables you to achieve a permanent repair in minutes.

  • SO EASY anyone can do it: Clean, squirt, level and wipe.
  • NANO-POWERED so repairs won’t pop out.
  • Lifetime Durability Guarantee.

Grab a tube today and you’ll be able to say goodbye to that ugly damage in no time.


  • WORKS ON: Acrylic and porcelain bathtubs, enamel clawfoot baths, enamel or porcelain sinks, toilets, fiberglass shower stalls and base, or ceramic tiles.
  • GLOSS finish that can be adjusted to matte.
  • THICK consistency so it works well on vertical areas.
  • SURFACES: porcelain, fiberglass, enamel, acrylic, ceramic, stone & wood.


AVAILABLE IN: White or has a Beige & White Repair Kit, to produce almond, tan, biscuit, or other shades of beige.

Colour Disclaimer

Actual colours may vary. This is due to computer monitors displaying colours differently and everyone can see colours differently. We try extremely hard to ensure our images are as accurate as possible, but please understand the actual colour may vary slightly on your monitor. For recommendations, please contact us via email or telephone. Please note any advice given by our staff is based on the information provided at the time by the customer.


Tech Specs

  • Water soluble, one-part epoxy, air catalyst.
  • UV and water resistant.
  • Can be sanded and drilled.
  • No primer required.
  • Suitable for use at temperatures above 70°F / 20°C.
  • In cool temperatures use a hairdryer to set for 2 minutes.
  • Vol. 12.9mL / 0.43 fl oz.
  • 90-day Customer Satisfaction Money Back Guarantee.
  • Lifetime Durability Guarantee.
  • Not to be used on surfaces that are continually submerged.

Application instructions

Do NOT use when temperature drops below 70°F / 20°C as the product will not cure.

  1. Scrub the area using soapy water and a toothbrush then rinse and fully dry.
  2. Shake the tube for 20 seconds.
  3. Apply enough to overfill the damage then wipe level using the levelling device built into the flat end of the tube.
  4. Immediately remove smears with a damp tissue.
  5. ‘Set’ the repair using a hairdryer for 20 seconds.
Cure time:
  • Apply at 70F/20C for 2 hours (in cooler conditions allow more time) then recoat (if necessary).
  • Avoid any contact for 48 hours after application.
  • Avoid getting wet for 14 days [If necessary, cover area with a temporary shield. e.g., plastic bag sealed with electrical tape).
  • MagicEzy will continue to strengthen and harden over the next 14 to 28 days BUT it is extremely strong in 48 hours.

FOR A MATTE APPEARANCE - tap repair with your finger immediately after step.

FOR DEEP DAMAGE- wait an hour and repeat steps #3, 4, & 5.
If required, repeat this process more.

FULL COLOR CLARITY and TOUCH DRY in 2 hours. Full strength in 3 weeks.

Safety Data Sheet


No more products available for purchase

Your cart is currently empty.